Warning Light - Dash

[stratosfear]

Hello!

I am looking for that red warning light in the center of the dash.
4441
Can someone tell on which other cars this light was used?
What would be the correct donor?

Michael

[ChrisCar6]

I think the club has a supply.

[stratosfear]

Who has these? A member?



I think the club has a supply.

[The Slug]

Try Regalia@stratosec.com

[Guy Mayers]

http://www.ebay.com/itm/75-FIAT-124-COUPE-EGR-LIGHT-BRAKE-FAIL-LIGHT-SPIDER-CONVERTIBLE-/190657133924?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3AFiat%7CModel%3A124&hash=item2c640cfd64&vxp=mtr

Lettering is easily removed with a bit of light sandpaper and the surface repolished with T Cut.

Simples!

Guy

[stratosfear]

Thanks for your help guys!

[The Slug]

Here (http://www.ebay.com/itm/1972-Fiat-Spider-Seat-Belt-Warning-Light-/290900409800?pt=Vintage_Car_Truck_Parts_Accessories&hash=item43bb03fdc8&vxp=mtr) as well.

[LM mic]

Hello
Which one is the right one to source and to modify sanding marking ?
5766 5765
Thanks for any help
If some one have spare to sell am interested ( price ? ) Thanks

[Guy Mayers]

They're all the same, pop the red perspex out of the lamp body, get a sheet of glass and put some fine grade wet and dry sandpaper on it and rub the perspex over it until the lettering and top surface is gone. Then use a polishing cloth on the surface of the glass, soaked in "T Cut" (or similar) and rub the perspex on this until the surface is smooth and shiny again.
If you want the original light unit it came from an early '70s Fiat 126, the handbrake warning light, which didn't have any markings on it at all. But it's the same mouldings and colour plastic as you get with these Fiat 124 Spider warning lights. Easy to find on eBay.com

Cheers

Guy

[ProtoTipo]

They'll do, but I found the shade of red is too dark.
The first one of these two is from... - an early Fiat 126??

[LM mic]

Thanks Mates !!
will try to find an 126 one .... looks better!
IF any one have some am really interested !

[Sando]

Also try Omicron (http://www.omicron.uk.com/omi-sos.html) engineering they had some of the lamp units remanufactured.......prices are high though

Rob