View Full Version : Brass reducing bushes
The Slug
17-05-2013, 23:33
Anyone know wher I can get some Brass reducing bushes from Ideally
M24-M22
M25-M22
and
M24-1/8 npt
M25-1/8 npt
Thanks
ChrisCar6
17-05-2013, 23:45
Sort of thing your local engineering workshop or model engineering enthusiast could knock up on a lathe from a bit of brass bar?
M24 & M25 to M22 - unfortunatly the sizes are to close together so a bushing is impossible.( M24 minor is smaller than M22 major).
If the pitch is the same ( they can both come in 1mm 1.5mm or 2mm) M24 could be reduced to M22 with a M22 Helicoil.
Your only other option would be to enlarge the thread to say M30 and then bush it back to M22.
Sorry I cannot be of more help
Nigel
strat24v
23-05-2013, 07:48
If its something for your oil cooler plumbing, adapt to AN sizes.
The Slug
23-05-2013, 09:59
All sorted now thanks chaps
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.