PDA

View Full Version : 7/8" Master Cylinder



john
18-06-2015, 12:55
Anyone have a 7/8" bore (0.875) Girling pattern Master Cylinder lying about?
Preferably with the integral reservoir, but not essential?

Bernard
18-06-2015, 15:56
http://www.rimmerbros.co.uk/Item--i-NRC8690P1?utm_source=google&utm_medium=cpc&utm_campaign=PLA&gclid=CNTeyKuymcYCFW7KtAodo7ELrw

Can't remember the bore size John although I have a suspicion it was 7/8"

phil

Bernard
18-06-2015, 15:58
http://www.lrseries.com/shop/product/listing/8980/NRC8690-LWB-110-BRAKE-MASTER-CYLINDER-ASSEMBLY.html

here too

john
18-06-2015, 16:45
Thanks Phil.
But I should have said it's for a bias pedal box so I'm just after a single cylinder, not tandem.
Good news is that Compbrake are back in business and not too far up the road so I'm collecting one from them in the morning.
http://www.compbrake.com/product/master-cylinder-0-875-remote/

Remote reservoir type but they do a reservoir which does screw straight into the master cylinder (if I can squeeze it down far enough for the front clam to close).

Sando
18-06-2015, 21:39
Hi john
let me check tomorrow.
I've got several sizes that I tried when I looked at a bias pedal set up. All brand new just used for a few miles to test.
Rob

Sando
19-06-2015, 09:51
Hi John
Sorry closest I have is 3/4
Rob

john
19-06-2015, 11:19
No worries Rob. Thanks for looking.
Have bitten the bullet and got a new 7/8" master cylinder.
Off on hols for a week so didn't want to leave the car immobile in the workshop.....