PDA

View Full Version : Parts WANTED, various....



ProtoTipo
22-03-2016, 11:03
WANTED:

Hawk front tie bars (tension struts).
1 Hawk rear tie bar (tension strut).
Hawk fuel tanks
UNF bolts/nuts (see photo attached)
Beta strut to front upright bolts x4

Fiat X1/9 boot lid hinges
Fiat X1/9 1500 steering column shroud

One Stratos rear lamp surround.
Stratos Rear spoiler
Stratos RH door helmet holder/door pocket

Thanks for any of the above.

Chris

Darkspeed
22-03-2016, 14:24
Hi Chris

You are welcome to the Momo wheel out of SiD - will not be offended if you say no ;)

http://i220.photobucket.com/albums/dd87/Dutton_Andy/Stratos%20Rebuild/100_4161_zps18e6a40b.jpg (http://s220.photobucket.com/user/Dutton_Andy/media/Stratos%20Rebuild/100_4161_zps18e6a40b.jpg.html)

Let me know what size and length the UNF bolts are as I have a fair few from all the Ginetta's that are being replaced soon.

I picked up an X1/9 column to replace the Beta one but after trying it out I am not sure which one I will end up using. I seem to recall that I came up against some issues with the Fiat part when I tried to fit it which is why the Beta is back in it.

Andrew

ProtoTipo
22-03-2016, 15:16
Thanks Andrew,

I've got a MOMO to X1/9 (or 124) boss, so that would do. For starters.
Let me know about the column, as and when.

Guy Mayers
23-03-2016, 21:22
Any of these any good Chris?

http://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=fiat+x19&_pgn=2&_skc=50&rt=nc

http://www.ebay.co.uk/itm/Fiat-X1-9-X19-Handbrake-Lever-Fixing-Plate-and-Gaitor-Trim-/262341372554?hash=item3d14c3aa8a:g:CvkAAOSw2ENW7C4u

http://www.ebay.co.uk/itm/FIAT-X1-9-STEERING-LOCK-AND-COLUMN-X19-IGNITION-SWITCH-/182051485110?fits=Car+Make%3AFiat&hash=item2a631d35b6:g:CLcAAOSwr7ZW4xPE

http://www.ebay.co.uk/itm/Fiat-124-spider-upper-steering-column-from-a-1979-/331803842313?hash=item4d410cd709:g:cwkAAOSw37tWCsw~

http://www.ebay.co.uk/itm/LANCIA-TREVI-Wheel-Bearing-Kit-713695100-2-01-80-01-87-/331805315018?hash=item4d41234fca:g:C3YAAOSwyjBW6qdK

ProtoTipo
23-03-2016, 21:32
Thanks Guy,

Trevi parts. Lateral thinking.

ProtoTipo
28-03-2016, 11:20
A return spring:
https://www.midwest-bayless.com/Fiat-X19-0_p-4469-4425811-u8-clutch-pedal-return-spring-fiat-x19-1974-88-u8.aspx

'Got one now.

ProtoTipo
29-12-2016, 17:52
'Just an update of parts I still need:

2 Fuel tanks
2 Fuel tank Monza caps
1 Rear lamp surround
2 Front Indicators
1 X1/9 steering column shroud
1 RH door pocket/helmet holder
1 Rear bulkhead
1 Rear window rubber
2 Rear (Delta Evo/Turbo circlip type) wheel bearings
1 Rose joint for upper front Hawk wishbones ('might have this now?)
2 Front Hawk tie bars (tension struts) and rose joints.
1 Rear Hawk tie bar (tension strut)

ProtoTipo
29-12-2016, 18:54
'Forgot these:

The rose joint spacers for either side of the front upper outer Hawk rose joint.
I've enough for one side, so just the pair for the other side.

Thanks. Chris.