View Full Version : Parts WANTED, various....
ProtoTipo
22-03-2016, 10:03
WANTED:
Hawk front tie bars (tension struts).
1 Hawk rear tie bar (tension strut).
Hawk fuel tanks
UNF bolts/nuts (see photo attached)
Beta strut to front upright bolts x4
Fiat X1/9 boot lid hinges
Fiat X1/9 1500 steering column shroud
One Stratos rear lamp surround.
Stratos Rear spoiler
Stratos RH door helmet holder/door pocket
Thanks for any of the above.
Chris
Darkspeed
22-03-2016, 13:24
Hi Chris
You are welcome to the Momo wheel out of SiD - will not be offended if you say no ;)
http://i220.photobucket.com/albums/dd87/Dutton_Andy/Stratos%20Rebuild/100_4161_zps18e6a40b.jpg (http://s220.photobucket.com/user/Dutton_Andy/media/Stratos%20Rebuild/100_4161_zps18e6a40b.jpg.html)
Let me know what size and length the UNF bolts are as I have a fair few from all the Ginetta's that are being replaced soon.
I picked up an X1/9 column to replace the Beta one but after trying it out I am not sure which one I will end up using. I seem to recall that I came up against some issues with the Fiat part when I tried to fit it which is why the Beta is back in it.
Andrew
ProtoTipo
22-03-2016, 14:16
Thanks Andrew,
I've got a MOMO to X1/9 (or 124) boss, so that would do. For starters.
Let me know about the column, as and when.
Guy Mayers
23-03-2016, 20:22
Any of these any good Chris?
http://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_nkw=fiat+x19&_pgn=2&_skc=50&rt=nc
http://www.ebay.co.uk/itm/Fiat-X1-9-X19-Handbrake-Lever-Fixing-Plate-and-Gaitor-Trim-/262341372554?hash=item3d14c3aa8a:g:CvkAAOSw2ENW7C4u
http://www.ebay.co.uk/itm/FIAT-X1-9-STEERING-LOCK-AND-COLUMN-X19-IGNITION-SWITCH-/182051485110?fits=Car+Make%3AFiat&hash=item2a631d35b6:g:CLcAAOSwr7ZW4xPE
http://www.ebay.co.uk/itm/Fiat-124-spider-upper-steering-column-from-a-1979-/331803842313?hash=item4d410cd709:g:cwkAAOSw37tWCsw~
http://www.ebay.co.uk/itm/LANCIA-TREVI-Wheel-Bearing-Kit-713695100-2-01-80-01-87-/331805315018?hash=item4d41234fca:g:C3YAAOSwyjBW6qdK
ProtoTipo
23-03-2016, 20:32
Thanks Guy,
Trevi parts. Lateral thinking.
ProtoTipo
28-03-2016, 10:20
A return spring:
https://www.midwest-bayless.com/Fiat-X19-0_p-4469-4425811-u8-clutch-pedal-return-spring-fiat-x19-1974-88-u8.aspx
'Got one now.
ProtoTipo
29-12-2016, 16:52
'Just an update of parts I still need:
2 Fuel tanks
2 Fuel tank Monza caps
1 Rear lamp surround
2 Front Indicators
1 X1/9 steering column shroud
1 RH door pocket/helmet holder
1 Rear bulkhead
1 Rear window rubber
2 Rear (Delta Evo/Turbo circlip type) wheel bearings
1 Rose joint for upper front Hawk wishbones ('might have this now?)
2 Front Hawk tie bars (tension struts) and rose joints.
1 Rear Hawk tie bar (tension strut)
ProtoTipo
29-12-2016, 17:54
'Forgot these:
The rose joint spacers for either side of the front upper outer Hawk rose joint.
I've enough for one side, so just the pair for the other side.
Thanks. Chris.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.