PDA

View Full Version : Wheel centre caps and clips



GrahamH
08-08-2016, 09:32
Where can I get a set of wheel centre caps and clips for the Hawk wheels? I've not talked to Gerry yet, I'm guessing he's the best bet?

Guy Mayers
08-08-2016, 09:38
I think Gerry is out of stock now? Not sure about the club either, our stock might well have gone too.

The last time I spoke to Gerry about them was with Ian Ford and the answer was Tony Castle-Miller at Middle Barton Garage I think. But try Gerry first in case he's commissioned another run?

Guy

GrahamH
10-08-2016, 06:29
Many thanks Guy will make a few calls

john
27-03-2019, 20:36
Anybody got a source for the snap rings?
Plenty on offer online but a diameter would be useful as I don't have the wheels to measure here.

john
27-03-2019, 20:40
Just found the diameter for Hawk centre caps as 58mm on another thread.
But if anyone has some spares or knows a good source please post it here.

The Slug
28-03-2019, 11:28
I think Gerry is out of stock now? Not sure about the club either, our stock might well have gone too.

The last time I spoke to Gerry about them was with Ian Ford and the answer was Tony Castle-Miller at Middle Barton Garage I think. But try Gerry first in case he's commissioned another run?

Guy

Your correct Guy but at £15 per cap it was not a price the club was prepared to pay, despite several efforts to get them produced ourselves, we could not find anyone who could do the job.

The snap rings can be bought here eBay item number:332795218138

john
28-03-2019, 14:55
Thanks Ian. Brilliant.

Guy Mayers
28-03-2019, 19:02
Have you tried those clips Ian? They're different to the ones I've got on my car and they look like they might foul the dome not the badge?
Guy

The Slug
29-03-2019, 12:41
I don't have a car now Guy to try them on now....!

There are plenty of people supplying clips if you do a search, so if they are not correct, I'm sure you will find others that may be more suitable.

Guy Mayers
20-04-2019, 15:01
John - here's the circlip for the domed centre cap. It's 58mm OD, 51mm ID and 1mm thick.
Guy

john
20-04-2019, 17:23
Oh man, that's brilliant Guy. Thanks again. A picture is worth a thousand words like they say.

Lancialulu
20-04-2019, 18:53
These are available but rthe caps are a poor printed repro not a cast repro

http://www.bernimotori.com/abarth_wheels_en.html

Guy Mayers
20-04-2019, 22:29
Pretty sure the Stratos wheel centre caps aren't cast Tim. They're a domed pressing with the logo printed on it.
Guy

The Slug
24-04-2019, 15:01
These are available but rthe caps are a poor printed repro not a cast repro

http://www.bernimotori.com/abarth_wheels_en.html

They look to be the same as the club used to have Tim

GrahamH
25-04-2019, 14:56
I got mine from a friend of mine who runs middle barton garage from Tony Castle-Miller he should be able to supply some caps and clips. he supplies Gerry with some parts.

The Slug
26-04-2019, 13:14
Yes I believe he charges £15 per wheel for dome and clip, that was the price when we enquired for the club.

john
02-05-2019, 16:45
Clips ordered and received from Middle Barton.
Great service and reasonable price.
Nice to get great phone service these days for such a small order. Thanks to MBG.

ProtoTipo
02-05-2019, 17:02
Clips ordered and received from Middle Barton.
Great service and reasonable price.
Nice to get great phone service these days for such a small order. Thanks to MBG.

I've had the very best of service from them in the past. 'Very helpful.

john
02-05-2019, 18:42
Good to know Chris.
I guess we should move this to suppliers like Ian says.

Guy Mayers
09-06-2019, 18:50
If Middle Barton runs out of stock?

https://www.autobelle.it/en/a/For_sale_Campagnolo_54mm_studs_Fiat_BMW_rims_288631.xhtml

No connection and no idea on shipping to the UK or elsewhere!

Guy

Kenny m
26-06-2019, 18:51
Middle Barton are now out of clips and caps but will hopefully get some in soon although price may be up a little due to currency