PDA

View Full Version : Cheap Alfa 166 donor car on Ebay



LPH_UK
11-08-2016, 00:19
£275 ono - claims 110k miles. No connection to seller.

http://www.ebay.co.uk/itm/Alfa-Romeo-166-3-0-Busso-3-0-V6-Engine-Manual-Gearbox-Ancillaries-/182227545905?hash=item2a6d9baf31:g:AiEAAOSwqfNXnOTG

Bernard
11-08-2016, 08:14
Saw that last............ cheap starting point, all the bits are there and a 3000cc !

Guy Mayers
11-08-2016, 13:36
£275 buy it now! If I had the space and need for 24v car I'd snap that up. You'll get your money back breaking it irrespective of the state of the motor.

Guy

Jeff
11-08-2016, 17:00
I'd be shot, hung, drawn and quartered if I did that :rolleyes:

Fingers
11-08-2016, 19:14
I work on the theory that it's easier to get forgiveness than permission......when she lets me. And always round down, everything was a hundred bucks, that seems to be the "that was a good deal honey" figure.

strat24v
11-08-2016, 19:28
If you have to ask then you know what the answer will be!

LPH_UK
12-08-2016, 00:25
I'd buy it now.....................................if I lived on my own.

If I did buy it, I might live on my own in the near future!

Rotor1
12-08-2016, 07:40
I would buy if now if only I were living there like you guys! It's a little difficult to drive it remotely from here to find out any faults it may have before stripping it and making preparations for its new life.��

strat24v
12-08-2016, 07:57
I live on my own!

NoCorseChris
12-08-2016, 11:59
Have to say, I've made very little selling parts stripped off the one I scrapped. £25 for the CD changer is about it so far..... Doesn't seem to be much of a market for used 166 parts. I'm using the ECU loom switches and instruments so maybe those bits might have sold for a few quid?

I've still got the wheels, some of the front suspension parts that were OK and the entire rear suspension setup including subframe plus a loft full of things like front wings, door glass, heater/ A/C parts, light units, door cards...that kind of stuff. Strongly suspect the whole lot will end up in the tip once my 166 goes.

Getting shot of the metalwork was a bit of a PITA as well so I can see why that one is cheap.