PDA

View Full Version : Alfa Clearout



Skelly
26-04-2017, 22:31
Selling all my Alfa 164 3ltr engine bits to fund new engine

Complete 3ltr 12v including new clutch (0 miles), ECU with wiring loom standard manifolds everything needed to run the engine. Has done less than 6000 miles since rebuild but has been stood for a few of years (does turn over) £350 ono Includes 5 speed box which will need looking, hard to get into first and second

2 x 24v ECU (0 261 200 663) £80 each

1 x Wiring loom for a above ECU £20

24v manifolds £80

12v 3 into 1 manfolds £100

Have got a complete 24v which I am breaking for parts

24v head gasket set ( includes cam oil seals, exhaust gaskets etc) £150

Hawk gear linkage offers

Can bring small parts to Stoneleigh

ChrisCar6
27-04-2017, 00:44
I'll buy the 24v Ecu loom if it is in good nick....

tomsredstratos
27-04-2017, 00:55
Hi Alan,
Could you post a photo of the 12v engine,or email it to me if you have one handy.
Thanks.
Tom.

Redline
27-04-2017, 12:25
I'm interested in the head gasket set if it's good for a 2.5l 24v. I'll be at Stoneleigh on the Sunday...

Mark

Skelly
28-04-2017, 09:34
I'll buy the 24v Ecu loom if it is in good nick....Sorry Chris loom has sold

Skelly
28-04-2017, 09:37
1118011181
Hi Alan,
Could you post a photo of the 12v engine,or email it to me if you have one handy.
Thanks.
Tom.

Skelly
28-04-2017, 09:40
I'm interested in the head gasket set if it's good for a 2.5l 24v. I'll be at Stoneleigh on the Sunday...

Mark The gasket set is just for the 3ltr

tomsredstratos
28-04-2017, 12:03
Alan,
You have a pm.
Tom

turbonutter
28-04-2017, 12:06
Selling all my Alfa 164 3ltr engine bits to fund new engine


I have to ask? Why are you swapping out the Alfa v6 and for what?

Skelly
28-04-2017, 17:29
I have to ask? Why are you swapping out the Alfa v6 and for what?

Thought i would go for something newer and more available, Ford 3ltr V6 out of ST220

Bernard
28-04-2017, 20:44
Thought i would go for something newer and more available, Ford 3ltr V6 out of ST220
Hi Skelly....that will be different...I will look forward to the build photos....good luck with it...Phil

turbonutter
28-04-2017, 21:17
Yes definitely a one off installation, so I guess its not an easy install - Hope it is all going well, It will be interesting to see when its done :)

ProtoTipo
29-04-2017, 08:58
Mmmmmmmm !!
http://www.stdrivers.co.uk/forum/uploads/1216977559-engine.jpg

john
29-04-2017, 13:52
And why not you have to ask?
At the first couple of shows we did with the ListerBell the ST220 engine was talked about quite a bit by prospective customers.
That was before Craig started thinking about Toyota engines of course.
But the Duratec has proven mid engined installation with Noble so following their cooling model would probably be a good idea.

LPH_UK
29-04-2017, 14:52
Good aftermarket of tuning parts for the Duratec 2.0, how is it for the V6? Something that isn't around for the Alfa that's for sure!

Ken Tomblin
29-04-2017, 22:07
mountune are good for tuning the Duratec and Jaguar AJ 30 v6 engines, good info on the Locost AJ 30 Web site, good power, rev to 8000 rpm and cheap parts!!!!!

ProtoTipo
29-04-2017, 22:20
mountune are good for the Duratec and Jaguar AJ 30 v6 engines, good info on the Locost AJ 30 Web site, good power, rev to 8000 rpm and cheap parts!!!!!

Aftermarket period looking cam covers are available for 4 pot Duratecs.
Some Jaguar badged ones would be good for this V6?

Skelly
01-05-2017, 23:15
Hawk Gear linkage for Alfa 164 3Ltr V6, 5 speed box
11209

Skelly
21-05-2017, 08:54
Most parts sold

Only have 1 x 24v ECU left and now thanks to the Slug posting that 24v ECU for sale will have to reduce the price on mine :( Cheers Ian;)
Still got the rear anti roll bar

Skelly

The Slug
23-05-2017, 10:51
Your is tested and working Skelly, can you say the same for the other one?
Buyer beware...

Guy Mayers
23-05-2017, 11:19
Did the gear linkage sell Alan?

Guy

Skelly
23-05-2017, 17:06
Did the gear linkage sell Alan?

Guy

Sorry Guy for not letting you know, Yes the linkage has been sold.

Skelly
23-05-2017, 17:09
Your is tested and working Skelly, can you say the same for the other one?
Buyer beware...

Good point, should ask for more:D