PDA

View Full Version : 12 valve chrome intake runners (set)



ProtoTipo
19-11-2018, 17:28
Wanted:

Set of six chrome 12 valve V6 Alfa intake runners/pipes.

Guy Mayers
19-11-2018, 19:23
I've got a set that are probably usable but not pretty Chris, not sure how much polishing would improve them?
Guy

john
19-11-2018, 19:27
Might have Chris but same situation as Guy.

ProtoTipo
20-11-2018, 08:58
Thanks Guy, John,

Obviously they're for Tim H. because of the ones that have gone missing.
'As good as the above. Here's a few photos of them:

john
20-11-2018, 13:38
Gone missing? In the post/ on a carrier?

ProtoTipo
20-11-2018, 17:35
Gone missing? In the post/ on a carrier?

No John, 'not a postal thing.
We're not 100% sure, but Chris can't find them.

Paul
21-11-2018, 16:26
Will the 24V ones work? - I have a set of those lying around somewhere

ProtoTipo
22-11-2018, 08:35
Will the 24V ones work? - I have a set of those lying around somewhere

Thanks Paul,
I'm not sure if the head end angle is a little bit different?
3.0 166 (or GTA) would certainly be too large in diameter.

ChrisCar6
22-11-2018, 21:30
I am sure that 164 12v & 24v runners are incompatible.

mariner
03-12-2018, 11:55
Wanted:

Set of six chrome 12 valve V6 Alfa intake runners/pipes.

Hi Chris,

I was looking for something else non car related and discovered I have a set of 12 valve inlet runners if you haven't managed to find any suitable then you are quite welcome to have this set.
Whilst not perfect their condition is quite good see photos.

rgds Bob

14156

14157

Lancialulu
03-12-2018, 12:35
These look just the job!
Tim



Hi Chris,

I was looking for something else non car related and discovered I have a set of 12 valve inlet runners if you haven't managed to find any suitable then you are quite welcome to have this set.
Whilst not perfect their condition is quite good see photos.

rgds Bob

14156

14157

ProtoTipo
03-12-2018, 13:45
These look just the job!
Tim

Bob's are better, Tim.

mariner
03-12-2018, 17:16
Hi Chris,

If the missing set was meant for Tim then I could post directly.
PM me an address.

Rgds Bob

Lancialulu
03-12-2018, 17:31
Sent a PM....

ProtoTipo
03-12-2018, 18:44
Hi Chris,

If the missing set was meant for Tim then I could post directly.
PM me an address.

Rgds Bob

Hi Bob,
Yes, send directly to Tim H.
NOT me.

Thanks for doing this Bob. You've saved the day.

ProtoTipo
03-12-2018, 18:56
See PM from me too Bob.

Lancialulu
04-12-2018, 09:58
Hi Bob,
Yes, send directly to Tim H.
NOT me.

Thanks for doing this Bob. You've saved the day.

You both saved the day. Great Club!
Tim