View Full Version : GP4 Stopwatch Light
Strat Fan
31-10-2020, 13:50
Has anyone got any good suggestions what to use or where to source a suitable solution for the small light which sits above the stop watches on a GP4 dash board.
Image attached for reference
16987
Thanks in advance
Normb666
31-10-2020, 17:05
This any good?
https://www.belmog.com/index.php?route=product/product&path=106_129&product_id=240
Item EL101 looks like what you're after...
Strat Fan
31-10-2020, 17:47
This any good?
Item EL101 looks like what you're after...
I did see that one earlier, ideally I'd like one where you pull it to switch it on but we may have to improvise/compromise!
Guy Mayers
31-10-2020, 18:06
There are Fiat rheostats with an off position I think Craig?
Craig,
Mine is homemade with a wiper switch I think as the on off switch
The light is made from a stainless hydraulic bulkhead fitting that's been modified and a small knurled part to act as the shade
16988169891699016991
Strat Fan
01-11-2020, 11:11
There are Fiat rheostats with an off position I think Craig?
Thanks, if I can't think of a solution for the pull on/off version then I will be heading down this route.
Strat Fan
01-11-2020, 11:13
Craig,
Mine is homemade with a wiper switch I think as the on off switch
The light is made from a stainless hydraulic bulkhead fitting that's been modified and a small knurled part to act as the shade
I was working on a drawing for a machined option yesterday, it might be the easiest solution.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.