Alfa 164 v6 intermediate shaft and bearing support

[hollytree]

Hi
Has anyone got an intermediate drive shaft and the bearing support arm that goes with it.
I don't know if they are the same on all the v6s.
Regards
Steve

[ProtoTipo]

I needs to be a 164 or possibly 166 Steve.

Certainly not GTA, GTV or 156.

[Guy Mayers]

What about the one on your existing engine? It's something that I might have but I can't guarantee it and can't get to it if I do have one until we move house, and that's looking like the end of May now... Yup, it'll be buried in the corner of the garage with the spare gearbox and we've stacked a ton of furniture and pre-packed boxes infront of it now. Soz!
Guy

[hollytree]

Guy
Thanks and no problem
I have one on the existing engine, i was just trying to do as much as i can on the "new" engine from Enzo to minimize taking things from one to put on the other.
I am also trying to find one of the 164 QV oil filter heat exchanger plates so i can pipe it all up
Regards
Steve

[ChrisCar6]

The manual and auto 164 shaft mounts are different, I guess you're looking for a manual one.

[hollytree]

Chris
thanks
i did not know that, and yes a manual one.
at some point i will look for another 5 speed box (unless someone says they are weak or something)
happy easter
steve

[rutthenut]

at some point i will look for another 5 speed box

If you still need another 5-speed gearbox, I do have a spare from a 164, plus a whole engine and box that has a Gripper lsd in it. I know you won't want all of that, but if you want either gearbox, I have these in Berkshire.