gearbox removal

[Skelly]

Is it possible to remove gearbox (alfa 3ltr 12v in a hawk) without having to take engine out?

[tipo158]

I don't have a Hawk kit, but I have removed one from an Alfa 164, so I would imaging that it would be easier to remove it in a Hawk.

[turbonutter]

Cant speak for a Hawk, but its not possible in a corse:(

[ProtoTipo]

I've managed it with a Beta.
Putting it back was more difficult.
I made some guide studs out of some monkey metal conversion wheel studs, to line the bell housing up.

[ChrisCar6]

I think John Rutter has done it.

[Sando]

YES .......done twice

[Skelly]

YES .......done twice

That's what i wanted to here :)

[Sando]

The stud (two best) trick to help you get it back on and lined up is the way to go, I use a bolt with a long shank with the head ground off so it slides easily. Just a couple of flats to get a spanner on if it is tight so you can get it out !
When you are doing it on your own juggling the box, a trolley jack and bits of wood it makes it much easier. Carpet upside down on the chassis is good for protection too
Rob