PDA

View Full Version : Alfa Romeo 164 wheel spacers



ChrisCar6
03-08-2022, 00:12
The 164 came with steel 3mm spacers, with the 5 x 98 pcd holes and 58.1mm centre bore. Does anybody have a pair? Aftermarket ones have larger centre bore holes and the spigots fall through.

Guy Mayers
03-08-2022, 06:55
Nothing in my spares cupboard Chris but I'd suggest posting in the 164/166 section on alfaowner.com as someone will have them lying around for no reason other than it being easier to keep than throw away!

Stableblock
03-08-2022, 07:53
If you get stuck would be easy enough to get some laser cut. You can have them any thickness then.

ProtoTipo
03-08-2022, 08:28
If there are any Fiat 4x98mm spacers around with the correct bore, you could drill the other 4 holes?
'Think they tend to be 5mm though.

I mean these OE type (https://www.ebay.co.uk/itm/125398801839?hash=item1d3259ddaf:g:4u4AAOSwF0BfHANP)
Does anyone know the centre bore of these OE Fiat spacers?

Strat Fan
03-08-2022, 09:12
If you get stuck would be easy enough to get some laser cut. You can have them any thickness then.
Just what Peter says, do you need a drawing?
and if so what outer diameter?
19923