View RSS Feed


  1. Coolers & Pipework Installation

    Started on the installation of the cooling system. The original design has been changed after several good emails with other members of the forum. I originally had one electric pump in the return line to the radator and one in the feed to the engine, mainly as this gave a nice clean installation. This has now changed so that both the pumps will be in the feed line to the engine, the main reason for the change is ensuring that the operation of the expansion tank feeding into the suction side of the ...
  2. Thermostat Housing Installed

    As mentioned at the AGM it was recommended by myself that it would be good if members started using the blogs for the build history - So I will lead by example and now start adding the build record. Any interesting info will remain in the forum threads..................

    All the O-rings arrived from Alfa Workshop so these were installed and lightly greased to allow the installation of the thermostat housing. Discovered also that the thread for the thermostat housing is M7, after ...

    Updated 07-05-2014 at 23:53 by ducatiman

  3. Uprated Lower Ball Joint

    While looking for various components on the suspension I have purchased the following Lower Ball Joint from Race Tech Direct who are specialist TVR dealers. After reading various articles are forums it became clear that some of the TVR's used this item as standard. There had been a couple of failures due to people installing cheap items.

    Below are the details from the supplier and their details on the web page if anybody else is interested. Retail price is £48 + VAT.

    Name:  C0036A.jpg
Views: 4087
Size:  46.2 KB ...

    Updated 21-11-2013 at 08:04 by ducatiman

  4. General Update

    Another update....................

    Updated 21-11-2013 at 08:24 by ducatiman

  5. The Build Continues

    Okay, lets see if I can move into the 21st Century and start the first blog of the Aseptogyl replica continuing build..........................not sure how this will work but here we go. Hopefully it will pave the way for others to record the build progress and replace any updates that were being done in the news letter. So hopefully others on the forum will follow..............................

    The objective at the present time is to get the car on the road ASAP so I will be making ...

    Updated 21-11-2013 at 07:23 by ducatiman

    Hawk Build