View RSS Feed

All Blog Entries

  1. Coolers & Pipework Installation

    Started on the installation of the cooling system. The original design has been changed after several good emails with other members of the forum. I originally had one electric pump in the return line to the radator and one in the feed to the engine, mainly as this gave a nice clean installation. This has now changed so that both the pumps will be in the feed line to the engine, the main reason for the change is ensuring that the operation of the expansion tank feeding into the suction side of the ...
  2. Fly By Wire Throttle

    Just installed the new throttle pedal for Fly by Wire with my New ECU.

    Nice Pedal from Lister Bell - Throttle Pedal Pot is Vauxhall.

    Name:  pedal bracket.jpg
Views: 4349
Size:  86.2 KB

    Name:  pedal.jpg
Views: 3794
Size:  66.8 KB
  3. New gear lever

    Finally I managed to get all of the new gear lever parts together after Anodizing and powder coating.

    Just a couple of Rose joint spacers to male up and its done...

    Name:  GL.jpg
Views: 3799
Size:  54.0 KB

    Name:  GL1.jpg
Views: 3829
Size:  72.7 KB

    Name:  GL2.jpg
Views: 3842
Size:  77.3 KB
    Corse Build , Tranmission
  4. Traction Control Wheels

    Some progress with The traction control wheel Installation,

    Front brackets test fitted, they just need tidying up a bit..

    Name:  TC Front left.jpg
Views: 4161
Size:  77.4 KB
    Name:  TC Front right.jpg
Views: 4094
Size:  76.9 KB

    The front was nice and simple, but the rears have to use CV joint trigger wheels, these I had to chamfer on the inner bore to fit over the cv joint cover. Next the bracket, but that will need a bit more thought than the front ones.....

    Name:  TC cv joint.jpg
Views: 3816
Size:  61.4 KB ...

    Updated 01-06-2014 at 22:22 by turbonutter

    Corse Build
  5. Traction Control

    My New ECU has Traction control Built in, so I just need the wheel sensors.

    Got some trigger wheels that fit the brake discs at the front and on the CV joints at the rear.

    Name:  Traction Control Discs.jpg
Views: 5895
Size:  77.5 KB

    Name:  Front Disc TC Wheel.jpg
Views: 4414
Size:  59.5 KB

    Mocked up the brackets today, just need to convert the alloy patterns to 3mm Stainless...
Page 3 of 8 FirstFirst 12345678 LastLast