View RSS Feed

All Blog Entries

  1. Inside the boxes

    It looks like my photos of the contents didnt upload, so lets try again.

    Name:  US Shopping.jpg
Views: 986
Size:  66.3 KB

    Now to power up the ECU.....
  2. Some Shopping

    Managed to pick up the shopping when we finally got to Houston

    Name:  boxes.jpg
Views: 959
Size:  71.1 KB

    Just need to work out how to carry it all home
  3. New Gear Lever

    I picked up the new support tower for the Gear lever I made this week from Alloy Racing Fabrications, its made from 3mm alloy so should be strong enough!

    Name:  new lever 1.jpg
Views: 1176
Size:  115.1 KB
    Name:  new lever 2.jpg
Views: 1092
Size:  91.6 KB
    Name:  New Lever.jpg
Views: 1120
Size:  102.5 KB

    Just need to finish off the linkage at the stick end, the modification at the box end to reverse the throw has been completed.
    Name:  P1070408_resize.JPG
Views: 1188
Size:  131.6 KB
    Name:  P1070410_resize.jpg
Views: 1152
Size:  58.1 KB

    Lets hope it ...
  4. Lower Compression Pistons

    Just Ordered new pistons to replace the damaged ones, these have a deeper dish, now 5.2mm deep, to drop the compression ratio to ~8.3:1. Pistons will have coated skirts & Total seal rings.

    Name:  3d view.jpg
Views: 1143
Size:  20.0 KB
    Name:  Side View.jpg
Views: 942
Size:  17.8 KB
  5. New Fuel Tank

    New Fuel Tank Designed, Has 10+ litres extra capacity, so might stop me running out...

    Some addons to check for space..
    Name:  fuel tank mods2.jpg
Views: 1247
Size:  134.9 KB

    From which the design evolved to make the tank.

    This is a half scale model in paper.

    Name:  tank 1.jpg
Views: 1175
Size:  48.5 KBName:  tank 2.jpg
Views: 1145
Size:  53.1 KB

    Full size tank will be alloy and foam filled.

    The new tank will be deeper, so does anyone know if the VDO dip tube senders can ...
Page 5 of 8 FirstFirst 12345678 LastLast