View RSS Feed

ducatiman

Coolers & Pipework Installation

Rate this Entry
Started on the installation of the cooling system. The original design has been changed after several good emails with other members of the forum. I originally had one electric pump in the return line to the radator and one in the feed to the engine, mainly as this gave a nice clean installation. This has now changed so that both the pumps will be in the feed line to the engine, the main reason for the change is ensuring that the operation of the expansion tank feeding into the suction side of the first pump.

Purchased the Molcal mounting brackets from Speedflow at the cost of 9:00 a pair: http://laminovapro.com/laminova-bracket/

Name:  IMG_4069 - Modified.jpg
Views: 103
Size:  72.4 KB

But looking at the speedflow website there has now been a warning put up stating not to purchase anything from them......................

Will get the solid bends welded on to the main pipework hopefully next week. I have also just purchased some exhaust heat wrap that will be used on the 32mm cooling pipes down the centre spine to reduce the heat transfer to the cockpit, recommended by another member of the forum.

Submit "Coolers & Pipework Installation" to Digg Submit "Coolers & Pipework Installation" to del.icio.us Submit "Coolers & Pipework Installation" to StumbleUpon Submit "Coolers & Pipework Installation" to Google Submit "Coolers & Pipework Installation" to Twitter Submit "Coolers & Pipework Installation" to facebook

Categories
Uncategorized

Comments