Fuel Tank Vent or Roll-Over Valve

Printable View

15-05-2013, 18:44
ChrisC

Fuel Tank Vent or Roll-Over Valve

I want to fit a period Lancia roll over fuel valve into the fuel line on my build. I have 2 series two Beta Coupes and I can't find one on either. Any clues as to where to look for them, I have been looking in the boot area of the cars with no luck, I assumed they were fitted to these vehicles.

Chris
15-05-2013, 18:55
Guy Mayers

Re: Fuel Tank Vent or Roll-Over Valve

My memory is kinda vague Chris - it was back in 1988 when I removed the vent from my donor (it's one of the few bits left on the car from that original car!) but I think it was high up above the filler neck on the inside of the boot, offside of the car?
Guy
16-05-2013, 10:39
ChrisC

Re: Fuel Tank Vent or Roll-Over Valve

Thanks Guy, I'll keep hunting in the boot.

Chris

All times are GMT +1. The time now is 14:59.

While every effort is made to moderate these forums, occasionally inappropriate comments may appear from other members. These comments are not necessarily the views of the owners or operators of Stratos Enthusiasts Club Form. The owners, operators and partner sites of Stratos Enthusiats Club Forum cannot be held responsible for other user's views. Anyone using these forums does so at their own discretion. If you feel a post by another user is inappropriate to appear in a public forum please report the post to the forum moderators who will act as soon as possible and as they see fit. However posts remain the sole responsibility of the member who submitted them. All copyright and other intellectual property rights in the materials on the Online Community are owned by the Stratos Enthusiasts Club unless otherwise indicated. The copyright in any contribution posted by registered users of the Online Community shall belong to the person making the contribution.