Brass reducing bushes

Printable View

18-05-2013, 00:33
The Slug

Brass reducing bushes

Anyone know wher I can get some Brass reducing bushes from Ideally
M24-M22
M25-M22

and
M24-1/8 npt
M25-1/8 npt

Thanks
18-05-2013, 00:45
ChrisCar6

Re: Brass reducing bushes

Sort of thing your local engineering workshop or model engineering enthusiast could knock up on a lathe from a bit of brass bar?
23-05-2013, 01:19
Nigel

Re: Brass reducing bushes

M24 & M25 to M22 - unfortunatly the sizes are to close together so a bushing is impossible.( M24 minor is smaller than M22 major).
If the pitch is the same ( they can both come in 1mm 1.5mm or 2mm) M24 could be reduced to M22 with a M22 Helicoil.
Your only other option would be to enlarge the thread to say M30 and then bush it back to M22.
Sorry I cannot be of more help

Nigel
23-05-2013, 08:48
strat24v

Re: Brass reducing bushes

If its something for your oil cooler plumbing, adapt to AN sizes.
23-05-2013, 10:59
The Slug

Re: Brass reducing bushes

All sorted now thanks chaps

All times are GMT +1. The time now is 21:58.

While every effort is made to moderate these forums, occasionally inappropriate comments may appear from other members. These comments are not necessarily the views of the owners or operators of Stratos Enthusiasts Club Form. The owners, operators and partner sites of Stratos Enthusiats Club Forum cannot be held responsible for other user's views. Anyone using these forums does so at their own discretion. If you feel a post by another user is inappropriate to appear in a public forum please report the post to the forum moderators who will act as soon as possible and as they see fit. However posts remain the sole responsibility of the member who submitted them. All copyright and other intellectual property rights in the materials on the Online Community are owned by the Stratos Enthusiasts Club unless otherwise indicated. The copyright in any contribution posted by registered users of the Online Community shall belong to the person making the contribution.