Hi,
I'm busy collecting donor parts for a lister bell build.
Do I need the chrome boot/bonnet release too or just the door handles?
cheers
Printable View
Hi,
I'm busy collecting donor parts for a lister bell build.
Do I need the chrome boot/bonnet release too or just the door handles?
cheers
Hi
I don't know exactly how the LB works but if you have the chance to get the boot/bonnet release do so ! (you can always sell them on if you decide not to use them)
Phil
Andy,
I am building a LB. The boot/bonnet release levers operates the Fiat X19 boot/bonnet release catches (2 required) which secure the rear body section to the chassis on the LB. The catches on the Fiat are identical, one is used for the engine cover and the other is used for the boot cover. If you source from one car the engine catch will be more corroded.
Gordon
Thanks Gordon. So where do the levers mount on the LB?Quote:
Originally Posted by Gordon Caro
Same place as an original stratos, in the door reveal, below the keep.
See here (LHD):Quote:
Originally Posted by strat24v
http://www.stratosec.com/Forum/album...achmentid=4232
Quote:
Originally Posted by ProtoTipo
I don't have permissions to view the link but thank you all for your help
Might I suggest purchasing the super profile book? Loads of pics in there to help with component positioning.
Become a member!!! Vital and friendly source of help if you are self buildingQuote:
Originally Posted by Andy-911
But be warned that the picture of the release handle in that book is upside down....Quote:
Originally Posted by strat24v
Guy