Printable View
WANTED:
Hawk front tie bars (tension struts).
1 Hawk rear tie bar (tension strut).
Hawk fuel tanks
UNF bolts/nuts (see photo attached)
Beta strut to front upright bolts x4
Fiat X1/9 boot lid hinges
Fiat X1/9 1500 steering column shroud
One Stratos rear lamp surround.
Stratos Rear spoiler
Stratos RH door helmet holder/door pocket
Thanks for any of the above.
Chris
Hi Chris
You are welcome to the Momo wheel out of SiD - will not be offended if you say no ;)
http://i220.photobucket.com/albums/d...ps18e6a40b.jpg
Let me know what size and length the UNF bolts are as I have a fair few from all the Ginetta's that are being replaced soon.
I picked up an X1/9 column to replace the Beta one but after trying it out I am not sure which one I will end up using. I seem to recall that I came up against some issues with the Fiat part when I tried to fit it which is why the Beta is back in it.
Andrew
Thanks Andrew,
I've got a MOMO to X1/9 (or 124) boss, so that would do. For starters.
Let me know about the column, as and when.
Thanks Guy,
Trevi parts. Lateral thinking.
A return spring:
https://www.midwest-bayless.com/Fiat...974-88-u8.aspx
'Got one now.
'Just an update of parts I still need:
2 Fuel tanks
2 Fuel tank Monza caps
1 Rear lamp surround
2 Front Indicators
1 X1/9 steering column shroud
1 RH door pocket/helmet holder
1 Rear bulkhead
1 Rear window rubber
2 Rear (Delta Evo/Turbo circlip type) wheel bearings
1 Rose joint for upper front Hawk wishbones ('might have this now?)
2 Front Hawk tie bars (tension struts) and rose joints.
1 Rear Hawk tie bar (tension strut)
'Forgot these:
The rose joint spacers for either side of the front upper outer Hawk rose joint.
I've enough for one side, so just the pair for the other side.
Thanks. Chris.