Printable View
Unfortunately one of my front 7" Carello fog lights was broken by a stone or something at the weekend. I realize it's highly unlikely anyone happens to have just one lying around or could point me toward a source, but thought I'd ask anyway.
Alternatively, if anyone needed one, I could sell the remaining good one and put the proceeds toward an alternative solution (and invest in a cover next time)
Regards
Paul
Here a yellow spot, Paul:
http://www.ebay.it/itm/CARELLO-PA-CR...kAAOSw0fhXjjpZ
It's a 7" round one I need, but I might change to this style if I can't find a direct replacement
'Sorry Paul, I missed the 7" bit.
So, round, not rectangular.
yes - I see what I can find. Worst case, I'll switch to rectangular style which may be less likely to suffer the same fate due to smaller size and recessed. It'd also allow the front clam to open more if I removed those big round pods
Here's a pair
http://www.ebay.it/itm/Coppia-fari-a...8AAOSwTA9X5m3Q
Or a single
http://www.ebay.it/itm/faro-fendineb...kAAOSwgZ1XrZPM
Guy
Hi Guy
The single one would be ideal except shipping is more than twice the price of the item itself (89 euro shipping to the US !!), and the price of the pair + shipping equally prohibitive (at least for my budget)
Now that you've got me looking directly on the italian ebay site (my searches on the US site were not taking me there even though I had the international option enabled), I did find this:
http://www.ebay.it/itm/G-O-FENDINEBB...QHYriWMISP1cRQ
can you tell if that's the same one? the price for a pair is a lot more reasonable
Regards
Paul
They look right at 170mm wide Paul. Check the lensed pattern first to make sure it's the same as you unbroken one, there are two types out there with different shaped flutes in the lenses. At least you'd have a matched pair?
Guy
thanks all for the help - got what I need from ebay Italy
Now just need to find a set of covers to protect them - I see vinyl padded ones with Carello logo on ebay but quite expensive for what they are. Alternately, might consider a metal mesh cover - there seems to be quite a few options for these available