166 24v 3.0 gearbox bell housing FOC

Printable View

16-05-2019, 23:13
LPH_UK

166 24v 3.0 gearbox bell housing FOC

Gearbox bell housing from a 3.0 CF2 166.

Has been repaired due to what looks like a rubbing clutch. Marked on the 'dry side' and evidence of a weld/repair on the inner side. Seems OK but the scoring could be welded up and ground back to make sure it was 100%.

These seem to be getting hard to come by now so could be worth repairing.

Free to anyone that can use it.

https://live.staticflickr.com/65535/...d55295af_c.jpg

https://live.staticflickr.com/65535/...d353095c_c.jpg

https://live.staticflickr.com/65535/...669f7bb2_c.jpg

https://live.staticflickr.com/65535/...1297710c_c.jpg

All times are GMT +1. The time now is 07:47.

While every effort is made to moderate these forums, occasionally inappropriate comments may appear from other members. These comments are not necessarily the views of the owners or operators of Stratos Enthusiasts Club Form. The owners, operators and partner sites of Stratos Enthusiats Club Forum cannot be held responsible for other user's views. Anyone using these forums does so at their own discretion. If you feel a post by another user is inappropriate to appear in a public forum please report the post to the forum moderators who will act as soon as possible and as they see fit. However posts remain the sole responsibility of the member who submitted them. All copyright and other intellectual property rights in the materials on the Online Community are owned by the Stratos Enthusiasts Club unless otherwise indicated. The copyright in any contribution posted by registered users of the Online Community shall belong to the person making the contribution.