cooling water housing

Printable View

07-06-2022, 16:26
hollytree

2 Attachment(s)

cooling water housing

Hi
The 164 v6 engine I bought off Enzo has a housing on top of the water pump that sends a pipe down the middle of the V towards the clutch end.
I want both hoses at the water pump end to suit Corse.
Does anyone have one of these that sits on top of the water pump and under the 2 hoses that connect to the heads. Coloured yellow

Thanks
Steve

Attachment 19627

Attachment 19628
04-01-2023, 09:58
hollytree

Re: cooling water housing

Part bought from ebay but without holes for hose connectors to oil filter plate.
Steve Bailey in Silsden is machining out the holes and tapping them

All times are GMT +1. The time now is 04:07.

While every effort is made to moderate these forums, occasionally inappropriate comments may appear from other members. These comments are not necessarily the views of the owners or operators of Stratos Enthusiasts Club Form. The owners, operators and partner sites of Stratos Enthusiats Club Forum cannot be held responsible for other user's views. Anyone using these forums does so at their own discretion. If you feel a post by another user is inappropriate to appear in a public forum please report the post to the forum moderators who will act as soon as possible and as they see fit. However posts remain the sole responsibility of the member who submitted them. All copyright and other intellectual property rights in the materials on the Online Community are owned by the Stratos Enthusiasts Club unless otherwise indicated. The copyright in any contribution posted by registered users of the Online Community shall belong to the person making the contribution.