Squeaky Nylatron Bushes

Printable View

Show 40 post(s) from this thread on one page

30-08-2012, 16:36
john

Re: Squeaky Nylatron Bushes

AAh! Right, I'm getting this now. So the inner metal bush is free to rotate within the poly bush material.
I'm thinking Corse, and the Spax bushes fitted in the wishbones in which the inner and outer sleeves are bonded to the poly or rubber.
31-08-2012, 12:19
strat24v

Re: Squeaky Nylatron Bushes

With a spax bush, the inner and outer bushes are fixed tight and the rubber twists. With the poly and nylatron, the inner bush is clamped but the plastic is free to rotate. There should be a clearance of say half a n
Mil between the inner bush and the combined metal outer and poly/nylon top hat sections.

Show 40 post(s) from this thread on one page

All times are GMT +1. The time now is 10:46.

While every effort is made to moderate these forums, occasionally inappropriate comments may appear from other members. These comments are not necessarily the views of the owners or operators of Stratos Enthusiasts Club Form. The owners, operators and partner sites of Stratos Enthusiats Club Forum cannot be held responsible for other user's views. Anyone using these forums does so at their own discretion. If you feel a post by another user is inappropriate to appear in a public forum please report the post to the forum moderators who will act as soon as possible and as they see fit. However posts remain the sole responsibility of the member who submitted them. All copyright and other intellectual property rights in the materials on the Online Community are owned by the Stratos Enthusiasts Club unless otherwise indicated. The copyright in any contribution posted by registered users of the Online Community shall belong to the person making the contribution.