Ammeter

Printable View

Show 40 post(s) from this thread on one page

26-07-2024, 11:45
Kenny m

Re: Ammeter

Thank for the info Guys , I knew the diameter and the -40/+40 it is just the pivot point of the needle . This one has the pivot point at the top according to Guys post the pivot point should be at the bottom on a Grp4 . I had seen both used I think Vinces car the needle pivots at the top and Guys at the bottom
26-07-2024, 19:19
Kenny m

Re: Ammeter

Just checked with the seller this has the 52mm case so correct -40/+40 but not correct larger 60mm case for works Grp4 car.
26-07-2024, 22:18
Guy Mayers

Re: Ammeter

Seller is known to me, he's has so many approaches for this he's letting the auction run it's course!

Show 40 post(s) from this thread on one page

All times are GMT +1. The time now is 17:31.

While every effort is made to moderate these forums, occasionally inappropriate comments may appear from other members. These comments are not necessarily the views of the owners or operators of Stratos Enthusiasts Club Form. The owners, operators and partner sites of Stratos Enthusiats Club Forum cannot be held responsible for other user's views. Anyone using these forums does so at their own discretion. If you feel a post by another user is inappropriate to appear in a public forum please report the post to the forum moderators who will act as soon as possible and as they see fit. However posts remain the sole responsibility of the member who submitted them. All copyright and other intellectual property rights in the materials on the Online Community are owned by the Stratos Enthusiasts Club unless otherwise indicated. The copyright in any contribution posted by registered users of the Online Community shall belong to the person making the contribution.