Lancia Busso engine Plennum Cover wanted

Thanks for the info, mine is GTA 24V and the Plenum chamber looks quite different. Who did the machining of the coil pack cover for you? Attachment 24355

Quote:

---

Originally Posted by Rallynut

I managed to get hold of a Thesis plenum, and then just machined off the Alfa Romeo off the over cover and then machined in V6 24V (enough thickness to remove the original writing and then machine in the v6 24v, after all it is just a cover), then just powder coated. It would be equally possible to keep the alfa plenum with V6 24V on it and then machine in whatever you wanted on the other cover. Attachment 24354

---

Brilliant :cool:

Quote:

---

Originally Posted by ah_sprite

I best make sure I padlock the bonnet on my V6 Thesis next time I'm attending an event... :rolleyes::p

---

Quote:

---

Originally Posted by Rallynut

I managed to get hold of a Thesis plenum, and then just machined off the Alfa Romeo off the over cover and then machined in V6 24V (enough thickness to remove the original writing and then machine in the v6 24v, after all it is just a cover), then just powder coated. It would be equally possible to keep the alfa plenum with V6 24V on it and then machine in whatever you wanted on the other cover.

---

That looks really good Euros.
No badging on the oil filler and OE clips on the intakes too.

I machined it myself, although took a few days as the cutter used had to be small dia to get the detail on lettering and numbers!

Not the plenum but the other cover (for the Kappa version) is available here ▷ No. 60595591 Valve Cover . I have used Bontoplaza before but had to arrange EU shipping address as they wont ship to UK now. No connection.