Printable View
Been looking for a cylinder, approx 1.5 inches dia with a domed end to use as a former. Looked all over for something suitable then thought ah, il try the trusty supermarket, they've always got things to make moulds from. Finally found the perfect thing, a bottle of durex intimate play and massage lubricant!
Quote:
Originally Posted by strat24v
We ALL know the shelves that you frequent John.........lol
If this is a mould for a gear knob, it may become the topic of many conversations and comparisons.
You can use the contents as a release agent..
Mr Picasso, have to clearly state that I am not making a mould for a knob!
Colin, I'm sure il find a few uses for said contents but the only one I can think of at the moment is to lube the flaps on our lasses back door so Dillon the pooch doesnt get his head stuck next time he tries to squeeze himself in.
Is that innocent or absolutely disgusting, I can't tell.
Innocent!
I put it to you Mr. Hinchliffe, that this 'Dillon' animal of which you speak, does not in fact exist.Quote:
Originally Posted by strat24v
Further more, you have dreamed up this scenario for the simple purpose of stringing together a list of double entendres?
I concur with my honorable friend Justice Jarvis...
And the jury result is a unanimous guilty verdict. ;)
'Talking about release agents;
Can someone recommend a trusted mould release for a small (grp) project?
Thanks for any help.
meguiars mirror glaze release wax
There are others but I use this.
Chris, seeing your post, i went along to see my Fibre Glass moulder tenant to ask his advice, and he suggested a product, the tin of which I have taken a photo of and will try to attach.
And whats more, he has given me the tin with a small amount in, which I shall bring to Uncle Phil's on Saturday.
Are you moulding or releasing from a mould?
What finish are you after?
What finish has the pattern/mould got?
Honey wax or PVA, or both depending on the application.
Thanks Craig, Paul, Robin,Quote:
Originally Posted by Strat Fan
Craig, It's to make the 'male' side of that press tool (to press thin 0.5mm embossed alloy plate 460mm x 230mm).
I have already made a 'first effort' which I now know I can perfect.
In the process of that, I used the remnants of an old 'Back to Black' aerosol, which worked to a degree, but not as good as it could have been.
Robin, that's kind of you, thanks.
Sounds like a one off use then Chris?
PVA has never failed for me.
I'm no expert but I think waxes are more for moulds you are going to use repeatedly, where you can build up a decent thickness of release agent to a high finish.
PVA has been quite forgiving for me.
Bear in mind though it's a different PVA than the White glue used for woodwork. Using that might have the opposite effect desired!
It's blue and sort of smells a bit like french polish.
Thanks John,Quote:
Originally Posted by john
Yes, it's a one off job, and not for the production of any fibreglass parts.
Thanks to John D., Craig and Paul.
I used Robin's tin of wax and some PVA (is it always blue coloured?).
Anyhow, it worked, and I've got a much much better grp side of the press tool this time.
'Will update at the next stage.