Montecarlo parts

As some of you might know, i have purchased the Lancia 037 project myself as i could not resist the call of Lancia.
Attachment 10100
So now up to the difficult task to find some very hard to find parts, maybe some of you know somebody that might have some ( besides the Montehospital and Montezone ).
What i am looking for are:

* Door handles ( preferably with internal mechanism )
Attachment 10101
* wiper mechanism
Attachment 10102
* 3 bonnet louvres

And some more bits.
So any directions would be welcome.

Thanks and best regards,

Pim

Hi Pim, good luck with the project - have you heard about these guys?

http://www.rallylegendreplicas.com/Lancia_037.html

Mick Covill is a top bloke and may be able to help out with the odd part?

Guy

Yes Guy,

I have even had contact with him, but more in an informative way. That will be an option for me for the bigger parts like sub frames and suspension parts. I have heard good stories about him.
Did not realize or think of him having the smaller parts as wel, might be worth a try,
Thanks for the tip!

Best regards,

Pim

Quote:

---

Originally Posted by Guy Mayers

Hi Pim, good luck with the project - have you heard about these guys?

http://www.rallylegendreplicas.com/Lancia_037.html

Mick Covill is a top bloke and may be able to help out with the odd part?

Guy

---

Hello Pim
Good luck to you with this great project!
I'm thinking about same one for the future... Building or buying one Lancia 037 replica
Cheers
Frederic

Jp at lancia sport was looking at remaking original rear uprights.

For the Montecarlo or the 037?

Quote:

---

Originally Posted by strat24v

Jp at lancia sport was looking at remaking original rear uprights.

---

037. Last I heard, he'd had an original 3d scanned.

Attachment 10571Attachment 10572So now i have found the bonnet louvres, i am going to modify a Beta wiper system and i found two door handles.
The door handles are without the lock barrels ( see picture ) does anyone know or have a picture of Fiat X 1/9 lock barrel, maybe these are the same?

Hello Pim

This is a link for a pic of X1/9 barrels
https://classic-auto.eu/fr/System/ac..._%252f_joints/
Scroll down to middle page

They sell them also ( neither bought from them before so no info about liability)


link only for the pic :)

Thank you LM mic, i have found a picture of therear of the Montecarlo handle, lock mechanism looks a lot like X 1/9 part, so maybe x 1/9 barrel / cilinder wil fit.
Has anyone got the diameter of the x 1/9 lock barrel for me ( see picture )

Seems that x1/9 is about 16.5 mm for the part just close to the key for 2mm thick.
Then is little smaller but can't measure as the pair I have are into the handles and do not want to dismantle !:rolleyes:

For the Montecarlo is also 16,5mm. so maybe worth a try.
Thanks for the help!