I'll see if I can get you the details from my belt. (Rob's original engine)
Printable View
I'll see if I can get you the details from my belt. (Rob's original engine)
They won't be able to help Peter, All Lancia Volumex Coupes, HPEs and Trevi Volumexes left the factory with power steering. Also, the shape of the inner wing precludes running a belt from the crank pulley direct to the supercharger, it has to follow an L shaped path from the crank pulley forward to the tensioner, up and over the supercharger drive cog, down to the power steering pump drive cog and back to the crank pulley.
I've never seen a Fiat 124 Volumex up close nor the Argenta VX to be able to describe the belt route but I'm pretty sure the 124 VX wouldn't have had power steering. However, with an upright installation the inlet manifold might be different?
Guy
that's correct all Beta VX and Trevi VX have power steering!
Fiat Argenta Volumex also.
but Fiat 124 Volumex and 131 Volumex not!
i think i take the measurement a go to an supplier!
Enzo :rolleyes:
Sounds like an excellent plan Enzo - when you find one that fits remember to buy a spare (or two!) It might be worth checking how the 124 and 131 VXs managed to keep the belts from flying off, there's no end fences on the crank or supercharger pulley but there is one on the power steering pump. Incidentally, if you have a spare power steering pulley you can machine the centre out so that it slips over the crankshaft pulley, tack it in place and you've instantly geared the supercharger up by 10- 15% and more power!
Guy
Guy
Thanks Peter,
the first parts are purchased!
and the glass fibre parts come this week from italy!
Enzo
here is lying a half 037!
Love to see proper P7 tread pattern.:cool:
Regarding Vx belt and run out, I used a tensioner wheel with offset centre and importantly had edges on to keep belt in line and on both pulleys.... I think.. it may have been Sierra Cosworth Cam belt tensioner.
Rob
Edit -found a picture
Hi,
All the best with this project. Looks very promising.
Cheers
Thank's Thomas,
first parts testet to fit! and i am surprised about the accuracy of fit
but it will be a long way. :)