5 stud coffins are ET0 and ET-50 as stamped on the wheels. Not sure how accurate these figures acually are as I measured the rear rim and worked it to out be ET45. Will double check.
5 stud coffins are ET0 and ET-50 as stamped on the wheels. Not sure how accurate these figures acually are as I measured the rear rim and worked it to out be ET45. Will double check.
I agree with Graham, Hawk wheels are- Front ET 0, Rear ET -45.
Roin Technologies wheels are- Front ET 7, Rear ET -36.5,
TMB Racing are quoted as- Front ET 21(?), Rear ET -32.
Not sure what is going on with the TMB fronts. All are listed as 8 x 15" Front, 12 x 15" rear.
Roin also do a 9 x 15" ET -14.7 & a 10 x 15" ET -25.
Last edited by Strat Fan; 26-11-2012 at 12:51.
"You can lead a horse to water, but a pencil must be lead"
Stan Laurel
With the rear ET -45 for the coffin's this would explain why I can't fit my Leada struts. with 345's and the ET -35 the tyre rubs the strut body.![]()
I have several sets of Revolution wheels of different ages - all 8" with ET0. On the front some need 10mm, some 5mm and some no spacer to clear the caliper!
Hi Craig,
my current setup about the TMB Racing is Front ET 19 and Rear ET-34 the ET make on order!
with Michelin TB15 Front 18/60/15 (215/55/15) and Rear 26/21/15 (295/40/15)
Enzo
BTW, to be on order by "group4wheels" for Marcolino Prtotipo Stratos PAG 8 & 9 x15 front ET 0 and rear ET-12
Calling all round arch grp4 car's, if you fitted 10" rears what ET did you use?
the rims for Marcolino Stratos are arrived now and
i am speechless that looks fantastic, thanks to Jonathan
http://www.group4wheels.com/index.php
i post picture soon.
Enzo![]()
Can't wait to see mine!!
here they are the promised pictures on Group4wheels side!
http://www.group4wheels.com/customers.php
thanks Jonathan.
Pag's on Porsche and Fiat 131 Abarth Gr.4!
looks also very nice.
it's possible next time i take them for my 131 Abarth Gr.4
Enzo![]()
Bookmarks