Results 1 to 10 of 37

Thread: Club Parts effort?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    SEC Member
    Join Date
    Sep 2011
    Location
    Cheshire
    Posts
    2,535
    Rep Power
    38

    Club Parts effort?

    Prompted by a few cracked lenses on Frederic's car, over the last few days I've been reading a few online articles about manufacturing parts in resin.
    I started off by looking at making replacement lamp lenses in amber and red tinted resin as I'm sure there would be a demand for these given that the side repeaters and rear light units are now so expensive, and the reversing light and fog light hard to come by.
    The process seems relatively easy. You make a two piece mould in silicone RTV type material using a good component.
    The material is not cheap but the most expensive aspect of the job is buying a vacuum pump and chamber to degas both the silicone for mould making and the resin for casting and also a pressure pot to ensure resin travels fully into the mould and ensure there are no cavities.
    A trawl through ebay suggest's you could easily spend £500 before you make your first part.
    I think it might be possible to make other components too like door spoons, handles, and the light units themselves.
    There is no point in gearing up to do this if anyone in the club already knows a facility somewhere that might do this for us for mates rates.
    Failing that might we "club" together and have a co-operative to manufacture and supply? i.e share the set up costs!

  2. #2
    SEC Member Marcolino's Avatar
    Join Date
    Sep 2011
    Location
    Schutterwald, South Germany
    Posts
    86
    Rep Power
    13

    Re: Club Parts effort?

    Hi John,

    i can chip in some information ... I did some parts for radio controlled models and for my business. I am using an old medical suction pump (about 40 litres per minute and -90kPa). Works fine for getting the air out of the resin and the vaccum for the mould ... and i got it for free!

    There is a very good "How to" handbook from a german resin distributor, the website and the handbook is also available in english.

    http://www.r-g.de/en/home.html

    and the handbook ...

    http://ezentrumbilder3.de/rg/pdf/Handbuch_englisch.pdf

    Think this will be a good start ... and the materials will also be available in the uk.
    The company is located only 100km away from my home ... if anything special is needed give me a mail!

  3. #3
    SEC Member Guy Mayers's Avatar
    Join Date
    Sep 2011
    Location
    Liverpool
    Posts
    3,302
    Rep Power
    46

    Re: Club Parts effort?

    Might be a good idea to speak to Gerry before taking things too far. I know he has a source for the door handles and spoons and I also know that he was taking to Steve at SVA about remaking the Fiat Dino front indicators. Lenses aren't the problem though, it's the body/reflector unit on that part. I don't think he had any plans for other light units though I may be wrong about that.
    Guy

  4. #4
    SEC Member Stratie.fr's Avatar
    Join Date
    Feb 2012
    Location
    France
    Posts
    770
    Rep Power
    20

    Re: Club Parts effort?

    Maybe this component for sale on ebay can be used



    Lens Brake Tail Indicator fix for LANCIA MONTECARLO STRATOS

  5. #5
    SEC Member
    Join Date
    Sep 2011
    Location
    Cheshire
    Posts
    2,535
    Rep Power
    38

    Re: Club Parts effort?

    Thanks everyone.
    Marcus, I'll certainly have a read through that guide.
    What kind of volume of material were you able to process in your "free" vacuum pump system?
    Looks like medical and dental pumps might be readily available .

  6. #6
    SEC Member
    Join Date
    Oct 2011
    Location
    Woodbridge, Suffolk
    Posts
    364
    Rep Power
    16

    Re: Club Parts effort?

    ....might be able to investment cast off a suitable plastic dummy to make light backs?

Similar Threads

  1. Club now on Facebook.
    By The Slug in forum Club News
    Replies: 8
    Last Post: 11-04-2018, 18:28
  2. 200 mph Club Sticker
    By stratosfear in forum For Sale
    Replies: 5
    Last Post: 05-01-2017, 08:40
  3. Is the Lancia Beta lump worth any effort
    By mr2by4 in forum Stratos Forum
    Replies: 28
    Last Post: 23-12-2014, 18:09
  4. Strat club on TV
    By catswhiskers in forum Stratos Forum
    Replies: 2
    Last Post: 15-10-2014, 09:28
  5. French Fan Club
    By Bernard in forum Events
    Replies: 17
    Last Post: 15-03-2013, 10:02

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •