What The Hell Is A "Nuova Didoni"?

**Guy Mayers** · 21-01-2013, 19:19

Picked up this $20 (plus shipping) gauge on eBay.com last week, 60mm diameter mechanical gauge made by Veglia Borletti, just needs some reworking on the lettering and the bezel repainting.

Proper result!

Guy

**mudhut** · 21-01-2013, 20:02

Whoops Guy... linkies!

You mean this? That is a real result all right.

**Guy Mayers** · 21-01-2013, 21:34

Thank Peter, still learning this computer stuff! It may be too late.... Anyway, here are the pics I meant to post!

Still wondering what a Nuova Didoni is though!

Guy

Click image for larger version.

Name: IMGP5871.jpg
Views: 137
Size: 57.9 KB
ID: 3695

Click image for larger version.

Name: IMGP5869.jpg
Views: 138
Size: 66.4 KB
ID: 3697

Click image for larger version.

Name: IMGP5868.jpg
Views: 137
Size: 55.5 KB
ID: 3698

Click image for larger version.

Name: IMGP5870.jpg
Views: 137
Size: 43.3 KB
ID: 3696

**Strat Fan** · 21-01-2013, 22:10

Thats a good find, the right diameter & the correct format dual needle to boot.
Can you make it work as a temp gauge?

**Guy Mayers** · 21-01-2013, 22:25

I very much doubt it Craig but I haven't opened it up yet to see. I was toying with the idea of a new face for it saying "oil temp & water temp" but leaving it reading oil pressure and fuel pressure and then refacing other gauges to match the correct styles/wording but performing other functions such as oil temperature on an "oil pressure gauge", I'm sure you know what I mean but the mere thought of looking at a gauge that says oil temperature and going through a thought process to realise it's actually oil pressure isn't worth the hassle when a gauge starts reading something other than "normal"..... Plus I'd end up needing an extra gauge as the original Gp4 car never had a fuel pressure gauge. Yup, it's a dilemma alright!

Next problem will be finding matching 60mm gauges with the correct needle deflections to modify for the remaining functions. Do these builds ever finish? Probably not...

Guy

**The Slug** · 21-01-2013, 22:43

Go on Guy I can't see you suffer any longer I will give you £50 and take a chance....

**Guy Mayers** · 21-01-2013, 22:47

I think you know the answer to that in your heart of hearts Ian...

Are you making any progress with your gauge manufacturers?

Guy

**The Slug** · 21-01-2013, 22:59

Slowly yes, just waiting for the next set of proofs......
Odd really when you send them the artwork in the format they ask for, then send them back to you changed....!

Wont be as good as yours mind

**ChrisCar6** · 22-01-2013, 08:52

Guy, since its internals are basically a voltmeter, it will be a fairly simple job to recalibrate to the signal coming from the senders. (I think!)

**Guy Mayers** · 22-01-2013, 13:06

Sorry Chris, the input to the gauge is mechanical, two hydraulic lines, one for oil pressure from where the electrical sender will be removed and another from the fuel line where a t piece will need to be fitted. Both with isolators in the engine bay of course! There isn't any illumination in the gauge either - it's provided through the two slots on the top of the gauge through green foil (that will have to be changed for clear!)

Guy