Waldegard Steering Wheel

[ProtoTipo]

It looks like the bend in the spokes is on a straight line.
So it would be much easier to make one up than (for example) it would be for the 4 spoke Stradale wheel.
I remember Gerry said the four spoke one needed some tooling because the bend for the dish is on a radius.

The two spoke Ferrero wheels also have a bend on a straight line, so they could possible be cut and formed too. The two spokes do tend to come up for sale much more often than the others though. When I say 'often', I mean twice a year!

[davehanman]

The bend is curved, looking at the lower spoke

david

[ProtoTipo]

The bend is curved, looking at the lower spoke

david

Yes, I think you might be right.
The radius should be the same as the Stradale Ferrero, so I wonder what Gerry's tooling consists of?

[Guy Mayers]

Still not the right one and yet even more expensive..

http://www.ebay.de/itm/VW-Kafer-Ferr...item51966c21e0

Guy

[ProtoTipo]

Still not the right one and yet even more expensive..

http://www.ebay.de/itm/VW-Kafer-Ferr...item51966c21e0

Guy

That's the same as a Miura wheel. 'Looks like the seller doesn't realise that, but knows it's rare?

[davehanman]

That looks very similar to the 1977 Safari wheel. Could probably be used for a 1977 car. Hopefully something will come up without the holes in the spokes !

Thanks for your help, let's keep looking !!

[tomsredstratos]

Is this the one you are looking for.
It is only on the RHD Lamborghini Urraco. LHD ones are very different.
If you think it is close we have some cars in storage I could measure etc.

Tom.