VSD graphics

**Sando** · 09-05-2013, 20:46

its not the tracing or producing graphic files, that bits relatively easy with the right tools, its the fact its a gradient of colour on the VSD so it needs printing or better painting, unless you cut some multi-coloured vinyl. I still don't recommend using Vinyl for anything on the Louvers. You have to use thinnest vinyl to get in all the contours and as Mel found it will always shrink back eventually if you heat it again. I'm sure there are people even on eBay that will print up some multi-coloured letters.

**john** · 09-05-2013, 21:34

You can print on vinyl now, so colour gradients should not be a problem.
Supposed to be Ok for vehicle graphics too but not had any experience of that so far.

**Cadami** · 05-06-2013, 11:24

The VSD stickers have arrived but I now have a dilemma. I assumed they would be produced on a white oblong background as per the orginals but instead they've been cut out. No problem for the louvre as it's white. It's the door stickers..... I actually think they'll look nicer without the background. Not orginal but mine's a rep anyway. Any thoughts?

**ChrisCar6** · 05-06-2013, 23:08

Can't think what VSD looks like - any pics?

**strat24v** · 06-06-2013, 00:40

**Sando** · 06-06-2013, 08:09

I can cut you some white backgrounds to stick them onto if you want.
stick some paper on with masking tape and see if you prefer with or without the background.

you got the hot starting sorted yet?

**Cadami** · 06-06-2013, 08:46

Originally Posted by Sando

I can cut you some white backgrounds to stick them onto if you want.
stick some paper on with masking tape and see if you prefer with or without the background.

you got the hot starting sorted yet?

They're supplied on a white background Rob so easy to offer up but difficult to visualise without it! Will have to bite the bullet and reorder if it doesn't work. I've been playing with the hot starting and it's improved. I'm off today so will continue with the ECU fuel settings and full full tanks..

**ChrisCar6** · 06-06-2013, 08:24

The VSD might get a bit lost against the blue, but would look less "stuck on". Go with what you like. I missed off the orange and yellow the original Publimmo scheme had on the wheel arches. And got the wrong wheel colour!

**Cadami** · 06-06-2013, 08:40

Originally Posted by ChrisCar6

The VSD might get a bit lost against the blue, but would look less "stuck on". Go with what you like. I missed off the orange and yellow the original Publimmo scheme had on the wheel arches. And got the wrong wheel colour!

That's my thoughts Chris..... they look "stuck on" with the background and might look better without. There's only one way of finding out....