Results 1 to 5 of 5

Thread: Tape over wheel balance weights

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #5
    SEC Member GrahamH's Avatar
    Join Date
    Jan 2012
    Location
    Alton
    Posts
    343
    Rep Power
    18
    I second Vinces use of silver tape. Used on some race cars too. Sticks well and forms over the weights. Needs proper degrease tho. If the weights are falling off must be the prep for the bond or the adhesive on the weight. Most tyre guys I've observed give a wipe with a dirty rag and thinners or solvent. Cleaner prep and good amount of degrease should sort it. Or the weights used these days have a poorer adhesive. All bonding is about the glue and the prep. I had a weight fall off my smart rear wheel and the weight was still sticky, poor prep.
    Decent brake cleaner , clean rag and degrease at least 5 times should do it. The wheels may have a silicone polish on from new.
    Go for the foil to make sure,
    Last edited by GrahamH; 12-09-2013 at 23:02.

Similar Threads

  1. Shrink tape
    By LM mic in forum Electrical and Gauges etc
    Replies: 0
    Last Post: 18-07-2016, 09:13
  2. Replies: 10
    Last Post: 05-06-2015, 14:53
  3. Brake Balance Knob, GP4.
    By The Slug in forum Original and alternative parts to build the cars
    Replies: 2
    Last Post: 30-11-2013, 16:48
  4. balance bar adjustment
    By Paul in forum Brakes
    Replies: 2
    Last Post: 25-05-2013, 18:44
  5. Engine balance
    By StruanR in forum Stratos Forum
    Replies: 2
    Last Post: 11-03-2013, 17:22

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •