Quote Originally Posted by Paul Eustace View Post

I will measure the Leda shocks as I don't appear to have the specification in my paperwork. I would have liked them to be 10mm shorter.

With the correct springs fitted the track rod arms almost touch the top link at full droop but they do miss by 3mm. I have to be careful with steering rack gaiters as the previous version I used did get caught in the gap when testing in the workshop on axle stands! If this proves to be an issue I will consider limiting the steering lock, move the top mount up or a shorter shock. Anyone had any issues with front shock length?
I specced a front coil over with a 16" open length & 100mm of travel on a Corse "S" chassis I built up, the tyre diameter was 605mm this will be slightly larger than your wheel tyre combination, it may be that you simply run with less ground clearance.