Wheels to borrow/rent/buy please for IVA test

[hollytree]

Craig/Tim
I have now worked through the IVA list and have done everything the man picked up, other than building bigger arches, as hopefully we can do the wheel swap.
I think your 7 1/2" rims on the back will be fine.
My fronts are 8" with the outer edge of tyre 2" outboard of the wheel centre cap.
Offside the wheel/tyre is about 3/4" outside the arch at the key measurement points.
Nearside it is 1/2" at rear and 1 1/4" at front. This suggests a bit of toe in, but i dont have any way to set this up yet, so I will adjust to get the minimum projection out of the arch for IVA, but I guess it will be about 1".
Tim if your wheels are 7" front, they key will be the offset and if the tyre edge comes inboard 1".

Regards
Steve

[Swamprat33]

Hi Steve, I am now back from holiday and have emptied my mailbox.

My wheels are 16" Compomotive MO.
Here is all the info i have for the wheels:
Front:
Size - 7x16
PCD - K
Offset - ET40
Centre bore 63.5
Ford fitting

Rear:
Size - 7.5x16
PCD - K
Offset - ET27
Centre bore 63.5
Ford fitting

They sit inside my front wheelarches and do not protrude like yours.

As i mentioned, I am happy for you to borrow them but i will need the car with wheels to attend the Rally Show at Castle Coombe and also need to get up to Craig @ LB for a few days before then to get some work completed.

Please contact me on PM or ring me to discuss.

Cheers
Tim