Getting off my arse

[tipo158]

From the pictures it appears as though there is too much toe out on the rear wheels, don't modify the bodywork until the wheels are positioned correctly!
The reverse "A" arm design of the lower rear wishbone moves the wheel around a lot in the arch as the toe is adjusted, I would spend my time trying to achieve the correct amount of toe (20 minutes toe in!) & combine this with positioning the wheel correctly in the arch at the same time before anything else is considered.
Paul's rear wheels rubbed on the centre tub where the wheel had moved forward to achieve the toe in required, the wheels should be no where near the rear mudflaps when set up correctly.

The car is on jack stands, not sitting on the ground. I don't seem to have a clearance problem in the rear, just the front when turning the wheels lock to lock.

Corky