Getting off my arse

**tipo158** · 01-06-2015, 20:07

Originally Posted by Paul

P.S. Just noticed the brand - so was that price with or without the family discount

I wish that I got a family discount. LOL

Corky

**tipo158** · 04-06-2015, 02:49

As suggested by Paul, I found a wiper assembly from a Ferrari 348 and will be using it for my wiper system. Still waiting for one missing part, then I need to drill the correct hole pattern in the wiper motor bracket and start figuring out the wiper timing.

**tipo158** · 16-06-2015, 00:19

Update, got the driver side (USA) door latch mechanism fitted. Test fitted the door window, then realized that I had the Litton/CAE/Napier Sport window, got out the Lister Bell window and test fitted it (see photos) much better fit. I have all the brake lines and clutch line done, missing one fitting (on order). Fuel lines, filters and pump ordered. A lot of little things need tweaking. Hope to hear it run in about a month.

**tipo158** · 16-06-2015, 00:54

The window photos in the previous post was the Litton window, below is the Lister Bell window.

**tipo158** · 06-07-2015, 23:35

Well the brakes are done and not leaking. Working on the fuel system, the photo shows the fuel pump in place, the two panels above the pump are where the filters will be installed. Need to re-install the e-brake and route the cable shifter. Also need to finalize the cooling system routing.