Reply With QuoteI've got a tired engine you're welcome to John. There are some odd bolts missing from it but if you feel the need to pop over and have a look just drop me a line!
Guy
Just a fresh appeal on this.
If anyone has even a bare casting in serviceable order I'd be very grateful for it.
I sincerely hope it doesn't come to this but if I can't sort the cooling issues with the spare 12 valve engine I've installed in Frederic's car then I'll have to look at rebuilding the engine which failed after only 250 miles or so of gentle use. Only I'll get it done by someone who knows what they are doing this time........
I've got a tired engine you're welcome to John. There are some odd bolts missing from it but if you feel the need to pop over and have a look just drop me a line!
Guy
Hello Guy, and thanks for that.
I would of course preserve the rest for anyone else struggling for parts.
I take it this is the engine from which you gave me the flywheel option when I was searching the other week?
I have your mobile number from that occasion so I'll give you a ring.
That's the one John. It ran fine when I removed it to upgrade to the Cloverleaf but felt down on power to me. You may be able to swap it out and see if it exhibits the same issues as the current motor?
Guy
I could use the sump!
Hi Tim, John hasn't taken the engine yet but I do have a spare NOS sump that didn't fit the Cloverleaf motor. I'm not sure why and don't know if it will fit the 12v motor. It's been fitted with a boss for the oil temperature gauge (the boss was supplied by Gary so it's likely that your sump has this already). If you would like this I'll happily post it to you at the weekend and you can see if it'll fit your motor. We can sort out what the postage and value is later?
Guy
I'm still waiting for word back on the pressure testing of the intact heads I have. Should get confirmation by tomorrow.
Hi Tim, John hasn't taken the engine yet but I do have a spare NOS sump that didn't fit the Cloverleaf motor. I'm not sure why and don't know if it will fit the 12v motor. It's been fitted with a boss for the oil temperature gauge (the boss was supplied by Gary so it's likely that your sump has this already). If you would like this I'll happily post it to you at the weekend and you can see if it'll fit your motor. We can sort out what the postage and value is later?
Guy
Guy,
do you have any pictures of the sump with the boss fitted, I'm trying to do this currently, and if there is an opportunity NOT to re-invent the wheel!!
Griff
I'll add that to my list of stuff to do this week Griff...... If you look at the front of the sump pan you'll see a raised circular spot in the fins, this was drilled and a threaded ally boss welded in. Quite straight forward if you can weld ally!
Guy
Hi Griff & Tim, here's the pics of the new old stock modified sump I've got. I haven't found out the exact fitment yet but you can see the part numbers on the casting which might help track down the engine type this sump will bolt to?
Cheers
Guy
Posting Permissions
Bookmarks