Sun visor

[maxlouis]

Am sure that's right. Later Fiat Dino Spider might also be the same as they're shorter, courser grain leatherette with the same black plastic mountings (and the seams split in exactly the same place) - but I think basically 124 and still available at reasonable money. I don't remember ever seeing the Stratos having the vanity mirror on passenger side; did it?

What you need are Fiat 124 spider sun-visors which are exactly the right depth, but too wide. You need to carefully remove the vinyl, and the padding, modify (shorten & straighten) the 3mm wire frame inside which is a bending and welding job. The 124 mounting hinges are correct for Stratos.

There's then a bit of jiggery-pokery to do, which involves (a jig), and an oven, et Voila, you'll have a pair of Stratos sun-visors.

You can see all of the parts needed, here: http://www.ebay.co.uk/sch/i.html?_fr...isors&_sacat=0

David

[Guy Mayers]

The 124 Spider has two types of mounting pin if I remember correctly - the inner ones are the ones we need 4 off but the outer ones have the visor pivot pin integrated into the clip for the hood clamp.

Wrong type:
http://www.ebay.co.uk/itm/Fiat-124-S...EAAMXQTT9RotC4

Right Ones
http://www.ebay.co.uk/itm/2-x-Halter...oAAOSwBLlU4fFi

Guy

[StruanR]

All useful stuff, has anyone actual dimensions of original?
Struan

[Guy Mayers]

All useful stuff, has anyone actual dimensions of original?
Struan

At the moment no, David can get that information but if he doesn't have it written down you'll have to wait until April Struan......... Or find another source!

Guy

[ProtoTipo]

Sun visor photo:
http://nise.altervista.org/b2-003/b1-013-13.jpg