WANTED:
Hawk front tie bars (tension struts).
1 Hawk rear tie bar (tension strut).
Hawk fuel tanks
UNF bolts/nuts (see photo attached)
Beta strut to front upright bolts x4
Fiat X1/9 boot lid hinges
Fiat X1/9 1500 steering column shroud
One Stratos rear lamp surround.
Stratos Rear spoiler
Stratos RH door helmet holder/door pocket
Thanks for any of the above.
Chris
Last edited by ProtoTipo; 30-03-2017 at 10:17.
Hi Chris
You are welcome to the Momo wheel out of SiD - will not be offended if you say no
Let me know what size and length the UNF bolts are as I have a fair few from all the Ginetta's that are being replaced soon.
I picked up an X1/9 column to replace the Beta one but after trying it out I am not sure which one I will end up using. I seem to recall that I came up against some issues with the Fiat part when I tried to fit it which is why the Beta is back in it.
Andrew
Thanks Andrew,
I've got a MOMO to X1/9 (or 124) boss, so that would do. For starters.
Let me know about the column, as and when.
Thanks Guy,
Trevi parts. Lateral thinking.
A return spring:
https://www.midwest-bayless.com/Fiat...974-88-u8.aspx
'Got one now.
Last edited by ProtoTipo; 29-12-2016 at 16:55.
'Just an update of parts I still need:
2 Fuel tanks
2 Fuel tank Monza caps
1 Rear lamp surround
2 Front Indicators
1 X1/9 steering column shroud
1 RH door pocket/helmet holder
1 Rear bulkhead
1 Rear window rubber
2 Rear (Delta Evo/Turbo circlip type) wheel bearings
1 Rose joint for upper front Hawk wishbones ('might have this now?)
2 Front Hawk tie bars (tension struts) and rose joints.
1 Rear Hawk tie bar (tension strut)
Last edited by ProtoTipo; 31-12-2016 at 07:54.
'Forgot these:
The rose joint spacers for either side of the front upper outer Hawk rose joint.
I've enough for one side, so just the pair for the other side.
Thanks. Chris.
Posting Permissions
Reply With Quote
Bookmarks