Could those bits be 3D printed?
For sale:
Fiat Dino window knobs as shown.
I have two pairs of chrome wing nuts, and just one pair of the smaller black plastic parts.
NOTE: I would rather keep the black parts with the best set of chrome parts, depending on what interest there is.
One pair of chrome parts has some marking/abrasion and are not as good as the other pair.
£75 for the good ones ('set 1')
£60 for the other pair ('set 2')
I can post to a UK address for £3.95.
Or deliver to the SEC agm at the Kit Car Show, Stoneleigh, a week this Sunday.
Could those bits be 3D printed?
Chris, You have a PM.
The best pair of chrome ones are now sold, along with the black plastic parts.
I've got the pair bonded into black bottle tops, but Ken Tombin has first refusal on these (see towards the end of this thread, Hawk mech. NOT incuded:
http://www.stratosec.com/Forum/showt...-Catches-Inner
Bookmarks