Quote Originally Posted by john View Post
Right, so it looks like the top forward wishbone mount has failed and that has allowed the wishbone to twist backwards and in so doing that has torn the corner of the square tube as the weld has broken away.
If you intend to follow the advice here I would not rip the engine out just yet as you need to ensure that the extra plates, tubes or whatever you add in do not foul anything. Particularly at the gearbox side as the box is very close to the frame.
It goes without saying that you will mod both sides of the chassis while you are at it?
John
I have taken plenty of photos, and I think the mod that Craig posted will work. I think the engine needs to come out to do the repairs correctly as access is difficult.
I may also take the opportunity to convert to a cable gear change if Craig tells me I am suitable!

Steve