Veglia temp sender

[Strat Fan]

Wanted- Oil/water temp sender to suit Veglia Borletti temp gauge.
If anyone has anything suitable please let me know.

Thanks in advance

[LM mic]

Hello Craig
This is link for what you need ;
https://www.oscaro.com/sonde-de-temp...-519181-3944-p

Just for information
they advise to be an alternative for ALPINE ; yes they are and I checked twice on various renault and Alpine forum

The alpine instruments where originally Veglia Borletti and then Jaeger but senders whre absolutly the same ! so now these remanufactuerd ( good quality senders are compatible and giving good OHMS informations
Hope this helps

[Sando]

I'm pretty sure this is the one I used and works with my Veglia gauge Craig.
Rob
http://www.demon-tweeks.co.uk/Produc...yh6xoCg7nw_wcB

[Guy Mayers]

If you can wait for shipping from Italy Craig?

http://www.ebay.co.uk/itm/FIAT-124-S...UvjA4VaqhIif1A

Guy

[LM mic]

[QUOTE=Sando;30262]I'm pretty sure this is the one I used and works with my Veglia gauge Craig.
Rob
http://www.demon-tweeks.co.uk/Product.do?

Ouuuuuuupppppppppppppppppps ?
Are you sure ROB ????
I read this morning on those Renault Alpine Forums that Smith senders where not adequate for all type of Veglia instruments and some
members where complaining about the wrong scale obtained with????

[tomsredstratos]

Hi Craig,

I used these two when I put my V6 in last year and read correctly with the Veglia Borletti gauges.

https://353652584127257704.weebly.co...mp_Sender.html

https://353652584127257704.weebly.co...mp_Sender.html

Tom

[Sando]

[QUOTE=LM mic;30267]

Are you sure ROB ?????

Hiya Mic
Yes working fine for me

[ProtoTipo]

Or, Superformance:
http://www.superformance.co.uk/fiat/electrical.html

[Griff]

Approaching the end of my rebuild, I'm starting to identify the little glitches that need fixing. I am now finding that I have a mismatch between the coolant temperature sender and the Veglia Borletti coolant temp gauge.
As a result the gauge is telling porkies!!You can see from the attached image, taken when the car had been in the garage overnight, and the engine was completely cold, that I have half scale deflection on the gauge. Once the engine has been running a little while the gauge goes to full scale deflection.
I haven’t had the chance to check the engine temp with an infrared tester yet, but the digital water pump is indicating a coolant temp of 85 degrees, and my oil temp gauge displays a similar value as well.
https://www.spiyda.com/magento/index...izard-mk3.html
the gauge master Mk. III appears to be a sensible answer, has anybody got experience or views as to its use? or a cheaper, more simple solution?

Griff