Roll Cage Cert

[rutthenut]

Help: Anyone have a copy of the roll cage certificate for the Transformer/Hawk HF?

I recall including details of it in the club newsletter many years back (probably around 1998) but can't find my actual doc.
If not a copy of the cert, just the certificate number would do, so I can contact the MSA with that.

[Bernard]

Hi JR

I assume that you have contacted JH ?

If you have problems I will take a look tonight

Cheers

P

[The Slug]

Hi John,

There is a copy in Newsletter 19 but its so badly copied you can't use it. However if JH is not able to help drop Carol (Membership) a note as she may have a copy of what you looking for.

[Media]

Hi John,

Are these the ones you require.

Hi John,

There is a copy in Newsletter 19 but its so badly copied you can't use it. However if JH is not able to help drop Carol (Membership) a note as she may have a copy of what you looking for.

[Lancialulu]

Would I be right in assuming all HF 2000 Transformers were built with these???

[colin artus]

Chassis with a SPY prefix (manufactured by Spyder Engineering '87 to '90) have a lighter cage structure than those made by Safety Devices (1990 on) to which the cert applies. These cages don't meet current regs which call for 44mm(?) tubing.

[rutthenut]

Hi John,

Are these the ones you require.

They were, yes thanks. Gerry did come back to me with them too. Will now see if MSA are happy to accept this as a 'homologated' (aka certified) rollover protection structure for current use.

[mel lewis]

Give me a call John, I got mine log booked and John Butts has his sorted also.

[ChrisCar6]

I got my logbook on the basis of that too, although it was nearly ten years ago.

[john]

It's more down to who you deal with than any paperwork you have........