Original Lancia Stratos Ferrero steering wheel?

[outlaw_singer]

[lang=nl]Seems like i lost track of this thread and the fact that i still have this wheel. Diameter is 34cm if i remember correct.

Bump! Still available...[/lang]

[Guy Mayers]

If anyone is looking for a replica steering wheel Gerry is about to order another batch. Last lot didn't stay on the shelf long so if you're interested drop him a line or give him a call.

Guy

[Guy Mayers]

And for those sending me PM's asking about the boss for the steering wheel...

http://www.ebay.co.uk/itm/FIAT-124-S...53.m1438.l2649


Guy

[ah_sprite]

That eBay ad refers to the boss as having the same wheel mounting holes as a Momo boss - is this the case? If so, presumably that means that the wheel would fit onto my MX5-splined boss that would fit in an LB?

Regards

[Guy Mayers]

Sounds promising Richard! I used to have a MoMo wheel on my car which had the same boss. What starring column are you using? Fiat X19? If you want to pop across to Liverpool one evening/weekend you can check out the hub on my car and the Fiat X19/Fiat 124 columns here.
Guy

[ah_sprite]

The LB uses a custom column which only uses the outer upper column and shroud from the X1/9. MX5 splines at the top, I believe!

Cheers,
Richard

[ProtoTipo]

The LB uses a custom column which only uses the outer upper column and shroud from the X1/9. MX5 splines at the top, I believe!
Cheers,
Richard

Richard,
If it needs an MX5 hub with 75mm pcd, there's no such thing.
You'd need to engineer something.

[ProtoTipo]

And for those sending me PM's asking about the boss for the steering wheel...

http://www.ebay.co.uk/itm/FIAT-124-S...53.m1438.l2649
Guy

Guy,
Is the hub in your link 75mm pcd or 70mm pcd?
It claims to be MOMO fit, but it looks more like the factory supplied Spider Ferrero (75mm) type?

[Stradale493]

I've got one of this style
https://www.ebay.co.uk/itm/Genuine-F.../152711897351?
as fitted to the X1/9 Bertone steering wheel - the screw pcd matched my momo wheel, can't remember whether the central raised boss was the right size for the momo wheel though as I machined it off to allow me to bolt a quick-release adaptor between the hub and the momo wheel.

Not tried to fit it yet so may all be moot if the steering column shaft splines have been modified - very interested to hear more on this thread.

Graham

[ProtoTipo]

The two big questions are:

1. Are the new Hawk steering wheels 75mm pcd?
2. Are the LB steering columns Mazda MX5 splines only?