Lancia V6 Plenum

**Fingers** · 25-01-2017, 06:35

Found this on ebay.de. Makes a nice addition the the Alfa V6 bolts straight on. Has the larger inlet runners too which is a good upgrade for the 2.5.

http://www.ebay.de/itm/Lancia-Thesis...kAAOSwoudW3Zr5

**Stratos Fear** · 25-01-2017, 17:28

Thanks Paul - I bought it! I'd seen yours and was so impressed I've been looking for one since (albeit a bit half-heartedly).
Peter

**ah_sprite** · 25-01-2017, 17:38

If I'd had some spare dosh, I'd have done the same! My Alfa ones are just about to head off for powdercoating - black, silver or red wrinkle finish... decisions decisions!

**Stratos Fear** · 25-01-2017, 17:48

Black crackle finish looks good. Did mine with a spray can (before I bought the Lancia plenum)

Click image for larger version.

Name: Alfa engine covers -crackle black (1).jpg
Views: 133
Size: 111.5 KB
ID: 10814

**ChrisCar6** · 25-01-2017, 22:30

the throttle body mount on the Lancia ones are different from the Alfa plenums.( They used a twin butterfly sequential arrangement)
I produced a siamese answer

**Strat Fan** · 25-01-2017, 22:46

Originally Posted by ChrisCar6

the throttle body mount on the Lancia ones are different from the Alfa plenums.( They used a twin butterfly sequential arrangement)
I produced a siamese answer

The one that Paul linked to & Peter bought looks like a phase 3 plenum so will hopefully have the same DBW throttle body as the 166/156 Ph2 & Ph3.
The Lancia one in your pics with the twin TB looks like a Ph1 24v that still has the idle air control valve?
How the larger inlet runners locate onto the smaller port alloy 2.5 casting is a question for Peter and/or Paul?