Wanted

[LM mic]

The gearboxes may well be the same...I don't know..... But the slave cylinder mounting on my 166 6 speed won't allow the slave cylinder to be in the correct position to actuate the clutch lever due to fouling the linkage system.... Craig showed me a bracket that was off a 156 that solved the problem...I could carve the existing bracket to make it fit but would look very Heath Robinson if my welding is anything to go by !!...lol

Phil
as said could you take apic of this bracket Craig showed you and send it of post it so I can be sure to try to source th good part !

[Bernard]

Hi Michel

Craig has kindly put a link above (Thanks Craig)

( http://newalfaparts.co.uk/clutch-gea...t-bracket.html )

So I will order one from there it will not cost much more and save you the time going to the scrap yard

Thanks to everyone for all your efforts

Cheers

Phil

[LM mic]

Ok Phil
I was printing the picture to have it at the scrapyard
Yes for that price it's better !!!! post international shipment is crazy and was not sure to have it ( sometime they are not keen to disassemble so small parts ; depend on which bottle of wine you give them )
Ok let us know if you solved finally the sourcing

[Bernard]

Ok Phil
I was printing the picture to have it at the scrapyard
Yes for that price it's better !!!! post international shipment is crazy and was not sure to have it ( sometime they are not keen to disassemble so small parts ; depend on which bottle of wine you give them )
Ok let us know if you solved finally the sourcing

OK will do Michel........... Merci Bien Mon Ami

[Lancialulu]

Neat!

[LM mic]

Tight fit !!!!
but finaly solved !!
Bravo ; hope to have a ride onto her when coming at the farm early March !!!!!!!!!!!!!!!!!!!!!!!!!

[Stratos Fear]

Wow - that is a tight fit - but so long as it works ..............